This is all the scuba diving gear you need!

Scuba Diving is one of the most rewarding activities you can do. A relaxing hobby in which you will experience different experiences. In each dive you will observe and learn new things while having the opportunity to make new friends. So, the relaxing atmosphere offered by the sea and the snorkeling activity itself are probably the main reasons for the existence of a camaraderie among divers. Then, you do not always find this in other activities.

 

Photo credit: pixabay
Photo credit: pixabay

Sharing experiences and even tips and tricks while navigating makes learning something new. So, this is an activity of coexistence in which if you travel alone. Then, you will always find a partner. And if you do it together. You will meet other people who share the passion for the exploration of the seabed.

Learn to dive and scuba dive underwater to observe all the mysteries that locks can be a magical experience. So, to enjoy this experience, you need to have the proper scuba diving gear. Then, since it facilitates greatly the power to do this activity of its kind.

Scuba Diving Gear

Mask or visor

It is the element that allows to see under the water avoiding the direct contact of salty or chlorinated water with the eyes. The mask interposes a layer of air between the eyes and water, facilitating vision. In addition to covering the eyes, it also covers the nose. It is composed of a skirt (rubber, latex or usually silicone) that adapts to the face, flat and tempered crystals, and fastening straps that hold the mask to the head. A good mask should have the following conditions:

-The visor must include the nose in its internal volume. To allow to balance pressures in immersion and to avoid the phenomenon of suction cup.

-Be sealed, so that the skirt fits snugly and comfortably to the face profile.

-For use in apnea you must have the lowest volume of air possible inside.

Photo credit: e-travelware
Photo credit: e-travelware

Snorkel

The snorkel is a plastic tube moderately flexible. That allows you to breathe on the surface with your face underwater.

Photo credit: Fishing evolution
Photo credit: Fishing evolution

Diving suit

The purpose of the diving suit is to protect the diver from hypothermia. Thermal insulation of the skin is not adapted to the aquatic environment. Because the specific water heat is lower than the air, the immersed body loses heat much faster. Then, in water below 27 ° C it is advisable to be thermally insulated; Temperatures below 22 ° C make it necessary and at 15 ° C or less, good thermal insulation is essential.

There are three basic types of insulation suits. Wetsuits, semi-dry suits and dry suits. The first is a suit made of sparkling and resistant materials (neoprene). Which form an insulating layer between the medium and the skin, but are not watertight. Its efficiency depends on the thickness of the foam and the fit to the body.

The second type of suit is like the first one but with sealing reinforcements in cuffs, ankles, neck and a zipper. Then, that diminishes the entrance of water between the suit and the skin. The last one are the dry suits, they are most effective by keeping the body out of contact with water. Greatly limiting temperature loss, and are usually combined with thermal underwear.

Dry suits are the only truly watertight suits. And their use is more complex, as they have a valve that allows them to swell underwater.

Photo Credit: Pinterest
Photo Credit: Pinterest

Escarpin or Chopin

They are boots or shoes of neoprene that protect the feet of the cold and the friction of the fins. Dry suits usually include their own sandals attached to the suit for added water tightness. So, these are not essential for warm temperatures.

Photo credit: Buceo Finisterre
Photo credit: Buceo Finisterre

Fins

The fins, also called flaps, flippers, or frog legs. Are two blades that extend from the feet. They allow to advance at a faster speed under water and are usually made of rubber or other synthetic materials that give them transverse stiffness and longitudinal flexibility. There are different designs and hardness of the blade that favor speed (for free diving in apnea), or power (for autonomous diving), underwater kicking.

Depending on the type of foot support the fins can be:

Open or adjustable; Attach the foot with a rubber band at the height of the Achilles tendon and allow a variable adjustment.

Closed or socks; as a rubber shoe and without possibility of variable adjustment.

The open flaps allow for the use of bulky boots with very robust soles. So, while the boots with closed fins look more like socks than a shoe, and basically have two functions: to prevent the feet from getting cold, and to prevent chafing by the friction of the feet with the fins.

Photo credit: Scuba.com
Photo credit: Scuba.com

Ballast belt

It is the belt where the ballast is held. Usually made up of pieces of lead or other heavy material with very negative buoyancy. So, the ballast is use to facilitate immersion and compensate for the positive buoyancy of the suit and bottle. Then, which at the end of the dive is usually almost empty. Also allows to quickly overcome the positive thrust of the rib cage full of air and facilitates the immersion in its beginning.

The ballast should not submerged the diver at rest. And after a forced expiration, the buoyancy obtained should be slightly negative.

Photo credit: Sport Sub
Photo credit: Sport Sub

Autonomous Scuba

This air regulator has incorporated one or more bottles of compressed air. That will supply the oxygen that the diver needs to undertake his personal journey under the waters. This technology will help us to regulate the pressure of compressed air and adjust it to the one that presents the aquatic environment. Then, we can breathe under the water without having to carry the annoying cables and tubes of supply of air from the surface.

The essential component of the autonomous scuba is the regulator. A mechanism that de-pressurizes the reservoir’s breathing gas from the reservoir. So, providing it automatically in each of its inspirations at ambient pressure, regardless of the depth it is in. Now, the regulator is completely useless and does not in itself constitute an autonomous scuba if it is not coupled with a reservoir of respirable gases. So, that allow the survival of the diver underwater.

Photo credit: Wikipedia
Photo credit: Wikipedia

Now that you know what is the scuba diving gear you need. You can start in the world of diving and explore the ocean, you just need the perfect place to do it. For that, we recommend you our Richmond Vale Diving Academy.

Located next to the beautiful beach of Richmond in St. Vincent & the Grenadines, you can learn scuba diving in the PADI instructor system. Also we have all the scuba diving gear that you need to do it.

If you want to have a glimpse of what it is, we have the following video:

We hope that with this article you adventure to experience the incredible world of scuba diving.

So, if you liked this article remember to share it on your social networks. Also, do not forget to leave us a comment.

This is all the scuba diving gear you need!
Tagged on:     

Leave a Reply

Your email address will not be published.